Tech 21 Fly Rig 5 (v2)
Has the tonality of the Blonde Character Series pedal. It includes 3-band active EQ, Level and Drive controls. To dirty things up, you have the flexibility of using the Drive control, the Boost function, or you can add grit from the Plexi/Cali section. Or all three. Each method achieves different tones. Provides the dirtier side of the Fly Rig. You have a choice of a roaring Plexi tone with its muscular crunch, detailed mids and mule-kick low end or the chunk of a ‘70s high gain amp tone inspired by the then-boutique shop over on the West Coast. Each mode can be dialed in to your liking with dedicated Drive, Tone and Level controls. Switchable Pre/Post Boost up to approx 12dB to beef up drive and distortion or increase the overall volume to punch up fills and solos. Voiced for the sounds of a vintage tape echo, with Time and Repeats controls. The Delay includes a switch to change from 1/4-notes to dotted 8ths. A Drift button adds a random, unpredictable element to the modulation in keeping with its vintage roots. Independent footswitchable reverb with choice of large and small “room sizes.” Post-SansAmp, pre-effects to patch in external effect pedals. Chromatic Tuner, operable via the BLONDE/TUNER footswitch. You simply hold the footswitch down to engage, which simultaneously mutes the signal path. • 1/4-inch 1megOhm input “Auto-switching,” self-adjusting 100V-240V, 200mA. Includes interchangeable international prong assemblies for EU, UK, Australia/New Zealand for use anywhere in the world. BUILT-IN SPEAKER/CAB SIM:SANSAMP
PLEXI / CALI
BOOST
DELAY WITH TAP TEMPO
REVERB
EFFECT LOOP
TUNER
ADDITIONAL FEATURES
• XLR?output with ground lift
• 1/4-inch low impedance output
• Rugged, all-metal housing
• Metal footswitches and jacks
• Silent-switching, custom footswitch actuators
• Measures 12.5”l x 2.5”w x 1.25”h • Weight: 20.7 oz.
• Utilizes included 9V DC Universal Power Supply: Model #DC9.
The 100% analog SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from pre-amp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar or bass speaker cabinet system. You can also place an external IR after a SansAmp to give additional flavor if you so desire. The SansAmp speaker sim is designed and individually tailored for a smooth, even response as would be achieved by a multiply-miked cabinet –without peaks, valleys, and notches associated with single miking and many IRs.
DAMM MUSIC CENTER
SHOP
CONTACT US
- Damm Music Center, Inc.
- kevin@DammMusic.com
- Call/Text: 316-773-9060
- 8945 W. Central
Wichita, KS 67212 - Mon.-Thurs.: 10am - 9pm |
- Fri.-Sat.: 10am - 6pm |
- Sun.: 12pm - 4pm
Band & Orchestra | Bluegrass | Drum & Perc. | Guitar & Bass | Harmonicas | Piano & Keyboard | Sound & Recording | Ukulele | Merch | Print Music | Home | Lessons | Repairs | School Rentals | School Step-Up Instruments | Buy & Trade | About Us | Financing | Calendar | MEPS | Site Map | Terms and Conditions Copyright © 2007-2026 - Damm Music Center, Inc
Website Design by MusicShop360

