sE Electronics X1 A Condenser Microphone
The X1 A: It could be your first mic, but it's one you'll want to keep forever.
There's a new entry point to sE's acclaimed X1 Series, and it's breaking the performance barrier (again) for every mic in its class.
When it was introduced in 2011, the X1 brought a new level of quality to its price point, competing easily with microphones costing several times as much. But that didn't stop sE from trying to outdo themselves again.
With a newly-developed condenser capsule and an exterior based on the rugged metal chassis of the X1, the X1 A offers first-class sound & specifications at an even better "home studio" cost, featuring an extremely natural frequency response, massive SPL-handling capabilities (150dB!), switchable attenuation and low-cut filters, and a perfectly balanced sensitivity level - so it's at home on absolutely any source.
The X1 A comes complete with a rock-solid, newly designed swivel mic clip and thread adapter to fit with any mic stand.
- ALL-METAL HOUSING & PREMIUM FINISH
- INTEGRATED WINDSCREEN
- COMPLETELY NEW ACOUSTIC DESIGN
- ATTENUATION & LOW CUT SWITCHES
- GOLD-PLATED XLR CONNECTOR
INCLUDED
- X1 A Microphone
- Swivel Mic Clip
- Mic Stand Thread Adapter
SPECIFICATIONS
- Capsule Type: 2/3" Permanently-Biased Condenser
- Directional Pattern: Cardioid
- Frequency range: 20 Hz - 20 kHz
- Impedance:
- Sensitivity: 20 mV/Pa (-34 dB)
- Max SPL: 130 / 150 dB (0 / 20 dB pad, (0.5% THD @ 1kHz)
- Signal to Noise Ratio: 78 dB(A)
- Equivalent Noise Level: 16 dB(A)
- Dynamic Range: 114 / 134 dB (0 / 20 dB pad)
- Low Cut Filter: 100 Hz, 6 dB/oct, switchable
- Attenuation Pad: 20 dB, switchable
- Connectivity: 3-pin male XLR
- Power requirement: 48V phantom according to IEC 61938
- Recommended Load Impedance: >1K Ohms
- Current Consumption: 4.0 mA
- Diameter: 58 mm (2.28 in.) x Length: 169 mm (6.65 in.)
- Weight: 390 g / 13.8 oz